Voodoo 4440H

Card specs:
PCI Voodoo Graphics, 2x TMU, 4MB FBI memory, 4MB per TMU memory, native HDMI output.

The extra 2MB FBI memory and 2MB per TMU memory can be enabled/disabled by setting the S1 DIP switch.

Full design files (editable schematic & PCB, PDF schematic, GERBER files, BOM, P&P, PCI bracket dxf file, FPGA bitstream and mcs file) are attached below. The FPGA code will be uploaded after I cleanup the code a bit. If you use another flash device, generate a new mcs file from the bitstream.

The following need to be added to autoexec.bat:

set SST_FT_CLK_DEL=0x4
set SST_TF0_CLK_DEL=0x5
set SST_TF1_CLK_DEL=0x5
set SST_VIN_CLKDEL=0x1
set SST_VOUT_CLKDEL=0x0

Known issues:
At the moment this is a Glide only card, D3D is not really working.
DII + LOD does not render correctly on 2x TMU V1 cards.