Quake2 ports with MesaFX and (newly written) miniGL backends, both with dual TMU support. -driver sources (SST1 and CVG support on IP32) https://github.com/sdz-mods/tdfx_irix-glide2x IRIX port…
In-system programmer for the SGI O2 system PROM. It which allows writing/dumping the system PROM via USB. This can be done at any point, with…
At the moment only SST1 (Voodoo1) is supported on IP32 (O2). Only tested on IRIX 6.5.30 with RM7000C CPU. -driver sources (SST1 and CVG support…
Low profile S3 Savage4 Pro PCI 32MB card with VGA and HDMI(technically DVI over HDMI connector) outputs. Tested under W98 and XP, works fine. HDMI…
PROM emulator for the PROM IC that sits on the SGI O2 R5k/RM5271/RM7000A (and other CPUs that can be fitted on there) modules.The PROM is…
Socket adapter for the O2 system PROM, so that the flash can be easily removed and programmed externally when needed. Installation instructions:-remove Dallas socket-remove flash…
New 128MB RAM modules for the SGI O2. Designed with currently in production off the shelf parts, so no need to source obsolete components. Attached…
I made this card to test if a Voodoo Rush with two TMUs can be made: When the second TMU is enabled in hardware, the…
